Hey there, web surfer!

To search and monitor rising trends,
create an account here. It's free.

Join Treendly

live demand report in US

Square Stock Steel

Finance     

  

Track this trend
(Monitor this trend over time)

480
searches/mo

 12 Months
Average: 52.42%
Trend: growing
MOM change: 0.13%
 5 Years
Average: 25.69%
Trend: growing
MOM change: 0.03%

Latest forum discussions

We tracked 181 total in the last 3 months

... references. Oddly, the Ordnance Dept stock number 7083301 is one digit..., which was the Ordnance Dept stock number for a very simple...). Just a rectangular piece of square stock steel, really. Why I find that...
Published in Near Salem, OR on 2022-04-23 in the Vintage Tool Discussion forum
This discussion is in English.
Its a good guess indeed. My guess would be a piece of steel square stock from Halcomb the original owner found then shaped the tip and repaired an old screwdriver. Only problem with that guess is all the crude pieces fit perfectly like they were meant to be.
Published on 2022-05-25 in the Vintage Tool Discussion forum
This discussion is in English.
Its a good guess indeed. My guess would be a piece of steel square stock from Halcomb the original owner found then shaped the tip and repaired an old screwdriver. Only problem with that guess is all the crude pieces fit perfectly like they were meant to be.
Published on 2022-05-25 in the Vintage Tool Discussion forum
This discussion is in English.
... impact socket tool by welding square stock steel to a socket because the...
Published on 2022-06-16 in the Farmall & International Harvester (IHC) forum
This discussion is in English.
... impact socket tool by welding square stock steel to a socket because the...
Published on 2022-06-16 in the Farmall & International Harvester (IHC) forum
This discussion is in English.
FRAMING SQUARE: The forged tip of this .... CONSTRUCTION: This lightweight steel square is made of high-quality steel, ensuring optimum durability... marking cutoff work on wide stock. It is a useful tool.../16", 1/8" graduations Rugged steel construction with low glare, anti-...
Published on 2022-06-26 in the Hot Deals forum
This discussion is in English.
FRAMING SQUARE: The forged tip of this .... CONSTRUCTION: This lightweight steel square is made of high-quality steel, ensuring optimum durability... marking cutoff work on wide stock. It is a useful tool.../16", 1/8" graduations Rugged steel construction with low glare, anti-...
Published on 2022-06-26 in the Hot Deals forum
This discussion is in English.
... for them using Silicon-Chromium steel spring wire (and limited by... I've measured, the numbers square at about 1.0 dead...), coincidentally about 43% higher than stock at ~30 N/mm (171.../minimum pressure). How do those square with reality? Maybe someone could...
Published in BFE on 2022-06-23 in the 1988 - 1994 (E32) forum
This discussion is in English.
... for them using Silicon-Chromium steel spring wire (and limited by... I've measured, the numbers square at about 1.0 dead...), coincidentally about 43% higher than stock at ~30 N/mm (171.../minimum pressure). How do those square with reality? Maybe someone could...
Published in BFE on 2022-06-23 in the 1988 - 1994 (E32) forum
This discussion is in English.
...you push to unlock the stock arms just rotates this steel locking piece, it isn't... Yes #10 is indeed steel, and has recess cuts that ... doesn't lock. My stock was sold to me as ...to the recess on the stock and wore the edge to ...degrees. F . I filed it square so lugs are engaged properly. ...use that in the plastic stock, but you must cut it ...have a plastic latch later stock. The airsoft parts are nearly ...
Published in USA on 2022-06-12 in the Heckler & Koch forum
This discussion is in English.
...you push to unlock the stock arms just rotates this steel locking piece, it isn't... Yes #10 is indeed steel, and has recess cuts that ... doesn't lock. My stock was sold to me as ...to the recess on the stock and wore the edge to ...degrees. F . I filed it square so lugs are engaged properly. ...use that in the plastic stock, but you must cut it ...have a plastic latch later stock. The airsoft parts are nearly ...
Published in USA on 2022-06-12 in the Heckler & Koch forum
This discussion is in English.
...never the joint. I used steel square blocks I found at MicroMark... there is a stick of square stock, and I added lower and...used. It came out quite square, when checked with a (wait... for it!) square! I'd like to take ... 2 F1 is held square to the fuselage with a steel block I picked up ... assures the fuselage is square. Views: 3 The nose block. ... block assures it is square. Views: 3 I followed the ...
Published on 2022-04-04 in the Thermal forum
This discussion is in English.
...never the joint. I used steel square blocks I found at MicroMark... there is a stick of square stock, and I added lower and...used. It came out quite square, when checked with a (wait... for it!) square! I'd like to take ... 2 F1 is held square to the fuselage with a steel block I picked up ... assures the fuselage is square. Views: 3 The nose block. ... block assures it is square. Views: 3 I followed the ...
Published on 2022-04-04 in the Thermal forum
This discussion is in English.
... 3/4-inch square shank tooling, fitted it with steel and plastic... 'piston' to accept 3/4 square shank tooling. Essentially, I milled... way to put a blind square hole in the part with... a piece of 3/4 square stock to align the bottom tool... top die's backing plate. Steel thumbnail shrinking dies (look how...
Published in MN, USA on 2022-04-23 in the Metal Working Forum forum
This discussion is in English.
... 3/4-inch square shank tooling, fitted it with steel and plastic... 'piston' to accept 3/4 square shank tooling. Essentially, I milled... way to put a blind square hole in the part with... a piece of 3/4 square stock to align the bottom tool... top die's backing plate. Steel thumbnail shrinking dies (look how...
Published in MN, USA on 2022-04-23 in the Metal Working Forum forum
This discussion is in English.
...'re just fairly high carbon steel, possibly with admixtures. Bearing in... just use the required diameter steel rod stock and file it up... ? I made a prototype using square stock rod (see me earlier post...://community.screwfix.com/thre...s-square-rod-8mm-x-8mm-10mm...
Published on 2022-05-28 in the Engineers' Talk forum
This discussion is in English.
...'re just fairly high carbon steel, possibly with admixtures. Bearing in... just use the required diameter steel rod stock and file it up... ? I made a prototype using square stock rod (see me earlier post...://community.screwfix.com/thre...s-square-rod-8mm-x-8mm-10mm...
Published on 2022-05-28 in the Engineers' Talk forum
This discussion is in English.
... from 5/15" square mild steel but, not having any in stock, I used..." x 3/16" flat mild steel, milled to thicknes first and ... was cut from 2mm sheet steel, the shape marked out and... a short slot in some square bar. I drilled and pinned...
Published on 2022-04-03 in the General Chat forum
This discussion is in English.
... from 5/15" square mild steel but, not having any in stock, I used..." x 3/16" flat mild steel, milled to thicknes first and ... was cut from 2mm sheet steel, the shape marked out and... a short slot in some square bar. I drilled and pinned...
Published on 2022-04-03 in the General Chat forum
This discussion is in English.